The quick changes in the vaping market have turned European compliance into a tough task for brand owners and distributors. As 2026 moves forward, following the European Tobacco Products Directive is more than a legal must. It forms a key base for success in the market. For companies that want to build a presence in Europe, the main choice comes down to picking an open vs. a closed pod setup. Knowing how these hardware types work with local rules shapes how well a brand can grow. Partnering with specialized wholesale vape suppliers like Shenzhen FM Technology Co., Ltd., which pushes new ideas under our main brand NICOMORE, helps your product range meet both buyer tastes and tight regional rules.
What Are Closed Pod Vapes and How Do They Work
A closed pod vape mechanism stands out for its simple plug-and-play design. This setup uses factory-sealed cartridges. They come pre-filled with e-liquid and hold built-in coils. When the e-liquid runs out, the user removes the old pod and puts in a fresh one. This closed pod configuration eliminates manual e-liquid refilling. It creates a steady choice for daily use.
Our production lines have improved this hardware design for strong results. One example is the G41 Pre-Filled Pod. It uses a 1.2Ω mesh coil that pulls out flavor with care. The small G53 Pre-Filled Pod relies on a 1.1Ω mesh coil that sharpens flavor details. Buyers who want a mild and steady draw like old smoking habits can pick the S05 and S06 Pre-Filled Pods. These models run on 1.6Ω mesh coils that keep vapor levels even.
Buyers in Europe often choose closed platforms. They like the ease and the lack of leaks. Since there is no hand filling, issues like spills or wear on parts do not appear. Pod cartridge models such as the S19 Leak-Resistant Pod and S29 Leak-Resistant Pod incorporate enhanced sealing structures. These seals guard the inside parts and keep the flavor clean over the life of the pod.
What Are Open Pod Systems and Why Are They Rising
An open pod design functions like a refillable oil vape pen, letting users fill empty pods by hand with their own e-liquids.This gives a custom feel that closed systems do not offer. Our refillable pod system guide shows this area is growing fast. It provides a cost-efficient solution that reduces cartridge waste compared with disposable devices.Users keep the main hardware and pod for many uses. They change the e-liquid or swap the cartridge only when the coil wears out.
When we build the best refillable pod vape hardware, our teams focus on strong build quality and good flavor hold. Many refillable pod platforms utilize 1.2Ω mesh coils to balance flavor consistency and vapor stability. These coils give steady vapor across many refill rounds. New ideas such as the S27 Top Fill Pod add easy fill ports. These ports cut the chance of spills during refills.
A clear trend is the rise of high-capacity hybrid devices. They link long use with rule compliance. The J01 and J01-B Open Pod System show this new style. It holds a 650mAh rechargeable battery and a dual-coil build. It also comes with a 2ml pre-filled pod and a 10ml refill bottle that sits apart. This layout reaches up to 20,000 puffs while being designed to align with current regional capacity frameworks. It represents a competitive high-capacity refillable platform for the European market.
How Does the EU TPD Impact Open vs Closed Pod Vapes
The Tobacco Products Directive sets firm rules on all vaping items sold in the European Union. Any brand that wants to sell here must check how its hardware type fits these rules. TPD rules state that a pre-filled pod or tank must stay at or below 2ml of e-liquid. Nicotine strength must stay at or below 20mg/ml. Devices also require child-resistant and tamper-evident designs.They must incorporate leak-resistant mechanisms during refilling and normal operation.
Closed pod vapes gain a clear edge under these rules. Their e-liquid amount is set at the factory. Our pre-filled systems hold exactly 2ml of e-liquid. They come in set nicotine levels of 0mg, 10mg, or 20mg. This makes rule checks simple and direct.
Open pod designs meet tighter checks. Since users refill by hand, the pod body must stay under the 2ml limit. The fill port must also block leaks. This is why strong build work, such as the seals in the S27 Top Fill Pod and the S29 Leak-Resistant Pod, matters for meeting safety rules.
How Do They Compare
Picking between open vs closed pod designs needs a clear look at specs, buyer habits, and care needs. The table below lists these points to help brands choose the right items for their range.
| Specificazione tecnica | Closed Pod Hardware Systems | Open Refillable Pod Platforms |
| Core E-Liquid Capacity | Sealed 2ml pre-filled volume | Empty 2ml refillable fluid chamber |
| Integrated Coil Resistances | 1.1Ω, 1.2Ω, or 1.6Ω options | Optimized 1.2Ω mesh setups |
| Nicotine Strength Variations | Pre-loaded at 0mg, 10mg, or 20mg | Determined by user e-liquid choice |
| Hardware Lifespan | Cartridges are discarded after single use | Pods are refillable over multiple cycles |
| Maintenance Complexity | Minimal maintenance required | Regular manual refilling needed |
| Primary Commercial Advantage | Highly intuitive and user friendly | Sustainable and cost effective |
How Can Brands Successfully Launch Compliant Pod Systems in Europe
To launch a compliant vaping product in the European market, a brand needs a build partner with solid tech skills and tight quality checks. Our 15,000 square meter plant runs four automated pod lines with robotic assembly. This setup gives high accuracy, cuts hand errors, and lets us meet large wholesale needs.
Rule checks must go past basic TPD points. Our full range meets CE, RoHS, and REACH standards. These marks confirm each device follows strict European rules on safety and the environment. A team of 20 to 30 R&D engineers and over 50 quality staff test every batch. They check for leak resistance and flavor strength.
We provide full ODM and OEM help to let global brands launch ready items. Whether you develop a closed pod platform or a refillable pod product line, our plant can turn your ideas into items that sell well.
Conclusione
The choice between an open vs closed pod system rests on what your buyers want. Some seek simple use while others want custom options. Closed designs give easy daily operation. Open designs can reduce long-term operating costs and decrease cartridge waste.Both types can meet European TPD rules when they rest on careful build work. A strong manufacturing partner helps your brand clear rule hurdles and give buyers great vaping items across Europe.
Domande frequenti
What is the wholesale price for manufacturing an open vs. a closed pod system with NICOMORE
Our wholesale prices change with hardware type, order size, and OEM needs. High-efficiency lines in our 15,000 square meter plant help keep costs low for both open and closed platforms while we hold strict rule standards. Contact our sales team with your order details for a clear quote that fits your brand.
Can your R&D team design custom branding for our best refillable pod vape line
Yes. Our plant supports full ODM and OEM work through a team of 20 to 30 R&D engineers. We can adjust shell colors, surface looks, LED patterns, and pack graphics for your best refillable pod vape line. This helps you launch a unique item that meets all TPD notice and label rules.
Are the e-liquids used in NICOMORE closed pods compliant with EU safety requirements
Each e-liquid mix in our closed pod vape mechanism lines goes through full chemical tests to meet European safety laws. We confirm that all parts avoid banned additives and keep nicotine at or below the 20mg/ml limit. Safety sheets and TPD files are ready for corporate clients to support a smooth launch in target markets.
